ANYTEC A27 - MOB Rescue & Swim Ladder; Painted Surfaces; Winter Storage; Spring Preparations; Measures before Winter Storage

6. MAINTENANCE__PAGE 79
6.3.8 MOB rescue & swim ladder
The ladder is a safety device, and lack of maintenance may make it hard or impossible to
use safely.
It is important to check the function of the ladder regularly. At the same time also check
(at least yearly) that it is properly fastened to the boat and has no cracks or corrosion
damages. For maintenance of its stainless steel, refer chapter 6.3.1.
6.3.9 Painted surfaces
The targa structure, the targa cover plates and part of the pulpit outside surfaces are
painted with black industrial-class paint.
They can be washed with regular mild detergents like boat shampoo and a soft sponge
or rag. Be careful with using polish and other abrasive chemicals and tools as they may
ruin the surface. As all with all dark paints, they will oxide and fade over time. However,
as the painted surfaces are of aluminium, there will not be any corrosion. Re-painting
may be needed for visual impression only.
6.4 WINTER STORAGE/SPRING PREPARATIONS
Preparing boats for winter storage are subject to your location. In cold climates, always
have your boat hoisted in good time before the water freezes. This is a good time to
perform all yearly maintenance, repair and inspection procedures. Even if your boat is
used around the year, a yearly maintenance period is recommended and shall follow the
same routines as specified below except when marked with a *.
6.4.1 Measures before winter storage
 Check the engine owner’s manual and carefully follow the instructions.
 *Lift your boat out from water well before ice formation. Your boat is not
dimensioned against sailing or storage in ice.
 Hoist the boat. Wash the bottom of the boat immediately afterwards. Algae and
slime easily comes if they are not let to dry.
 Remove the bottom drain plug (refer chapter 3.10) and leave the drain open.
 Check the condition of the hull. Repair damages directly or the next spring
before launching the boat.
 *When preparing to store a boat for extended periods, please refer chapter
6.1(Fuel System).
 Ensure that the hull has sufficient support to avoid damages or instability. If
uncertain, always consult experts such as your dealer.
 Follow the maintenance instructions given in the engine manual. We recommend
that you hire an authorised service company to ensure a safe and reliable
operation of the engine. Do not forget to service the engine controls and
steering system.