Need help?Do you have a question about the AOSEED X-MAKER and is the answer not in the manual?
General| Brand | AOSEED |
|---|---|
| Model | X-MAKER |
| Category | 3D Printers |
| Language | English |
Lists the main components included with the X-MAKER 3D printer.
Details all items included in the printer's packaging for initial setup.
Identifies and labels the various physical parts of the X-MAKER 3D printer.
Guides on connecting the power cord and turning on the 3D printer.
Covers initial setup steps like language selection and Wi-Fi connection.
Step-by-step guide for correctly installing the filament holder.
Instructions on how to properly insert filament into the printer's inlet.
Overview of the printer's touchscreen interface, including homepage and settings.
Explains two methods for loading filament, including preheating the nozzle.
Provides two methods for unloading filament from the 3D printer.
Details the process of printing a 3D model and the printing interface.
Instructions for post-print actions, including removing the print and base plate.
Guides on safely removing support structures from printed models.
Instructions for changing filament in both idle and printing states.
Explains how to move printer axes and use motor release for adjustments.
Details calibrating and leveling the nozzle and base plate for print quality.
Explains various control options like lights, fan, child lock, and error sensors.
Covers help resources, status, and printer information within settings.
Instructions for downloading the X-MAKER App for PC and mobile devices.
Introduces the X-MAKER App modules: Things, Theme, Design, and Print.
Describes the well-designed 3D model library available in the app.
Explains gamified 3D design gadgets and themes in the X-MAKER App.
Details graphic and modeling 3D design apps for advanced creations.
Guides on connecting to the printer and using one-touch printing via the app.
Introduction to X-PRINT slicing software, requirements, and installation.
Explains the user interface elements of the X-PRINT software.
Details functions for moving, scaling, and rotating models in X-PRINT.
Guides on preparing models for slicing by setting parameters like layer height.
Describes slicing models and printing them via network or U-disk using X-PRINT.
To Next Page