APE 50 - Page 19

7032 SOUTH 196th - KENT, WA 98032 - (253) 872-0141 / FAX (253) 872-8710
OPERATION / MAINTENANCE MANUAL
MODEL 50 VIBRATORY HAMMER WITH MODEL 260 POWER UNIT
Item Description part number Qty
1 Inner suppressor 312103 1
2 Outer suppressor 312102 1
3 Elastomer plate 311003 8
4 Elastomer 311004 8
5 Rubber bump pad w/bushings 312109 & 312110 1
6 Shear pin (discontinued) 1
7 Center swivel pin 312106 1
8 Swivel mount block (now part of the suppressor weldment) 1
9 Shackle mount 312107 1
10 Plastic swivel bushing 312108 1
11 Spring pin 1 1/4" x 5 3/4" 114500 (note: This part is sold as part of the bolt kit)
12 Grease fitting 221001 2
13 Hex head cap screw 3/4" x 2 1/4" with lock washers 16
14 Hex head cap screw 3/4" x 3 3/4" with lock washers 8
15 Socket head cap screw 5/8" x 3 1/2" with lock washers 8
16 Socket head cap screw 1/2" x 7/8" with lock washers 32
17 Socket head cap screw 3/8" x 1 1/2" with lock washers 4
18 Hex head cap screw 1/2" x 3/4" with lock washers 4
Page 2-2 A