AQ M-Tech AB Ultrasound Controller Manual 51
14. Software Version History
Version 6.31 December 2022
Air Sensor DAP6 changed internal settings.
Gelsensor relay setting changes.
Version 6.22 June 2022
Bugfix on Air Sensor DAP3
Gelsensor relay setting changed from 10-16% to “out of range”
Version 6.10 March 2022
Air Sensor CQS has been added.
Version 6.00 June 2021
A new gsd-file version 6.0 (for profibus) is updated with additional parameter values. This gsd-file
version 6.0 must be used for DP72 and GP72 version 6.0 and higher.
G72 and GP72: the AD-converter has been recalibrated and WR-calculation has been corrected.
Air Sensor mode: SAC4.5 internal parameters has been adjusted.
Level sensor mode: the velocity sensor will limit the level both at high and low level (previous only
at low level).
Version 5.70 February 2021
Air Sensor DAP3 gets improved internal settings. Level Switch diameter range has been
increased. A new Level Switch Technique is available: Dual.
Version 5.60 November 2020
Air Sensor parameter FREQUENCY is added which is needed when the liquid is acetic acid. Air
Sensor SAC2 get improved internal settings
Version 5.53 May 2019
Panel buttons get improved noise filter
Version 5.52 May 2019
Air Sensor mode get fixed the type settings bug in version 5.50 and 5.51
Version 5.51 January 2019
Air Sensor FCS4 and PAC4 get improved internal settings
Version 5.50 December 2018
Air Sensor CCS Ex has been added to settings
Version 5.41 November 2018
Level Switch MK has been added to settings
Version 5.40 November 2018
Level Switch MS has been added to settings
To Previous Page
Loading...
Need help?
General