What to do if AquaLab Measuring Instruments displays error 'Firmware is corrupted'?
If the AquaLab Measuring Instruments displays the error “Firmware is corrupted,” it means the firmware on the instrument is corrupted and needs to be reloaded.
Why does AquaLab 4 Series Measuring Instruments show no moisture content reading?
If the AquaLab Measuring Instruments displays the message no moisture content reading, make sure that the sample water activity and the instrument controlling temperature are within the scope of the selected moisture sorption isotherm model because the water activity or temperature for that reading is beyond the scope of the moisture sorption isotherm.
What causes dew point sensor failure in AquaLab Measuring Instruments?
If the AquaLab Measuring Instruments displays dew point sensor failure, it means the Cooler is damaged and needs to be serviced.
What does message on screen mean on AquaLab 4 Series?
If AquaLab Measuring Instruments displays a message on screen, it means the crystal that runs the firmware is having trouble starting. Occasionally, cycling the power solves the problem. If this message continues to appear, the instrument needs to be serviced.
Information on how to contact Decagon for assistance and support.
Important safety precautions and warnings for operating the AquaLab.
Technical specifications for the AquaLab 4 instrument.
Explanation of the principles and technology behind AquaLab operation.
How temperature affects AquaLab measurements and its importance.
Definition and significance of water activity in products.
How temperature influences water activity measurements and instrument performance.
List of items included in the AquaLab package.
Steps for powering on and preparing the AquaLab for use.
Description of the main measurement screen and its displays.
Accessing and modifying instrument settings via the configuration menu.
Detailed steps for cleaning the instrument's block and sensors.
Step-by-step cleaning process for the AquaLab instrument.
Steps and standards for verifying the water activity measurement.
Details on checking and adjusting the instrument's calibration.
Guide to resetting the AquaLab to its original factory settings.
Step-by-step instructions for preparing samples for the AquaLab.
Procedures for measuring samples containing volatile substances.
Step-by-step guide for performing a water activity measurement.
How to measure moisture content using the DUO model.
How to adjust moisture content readings based on reference methods.
Overview of the AquaLink 4 software for data management.
Instructions for using terminal programs to connect to the AquaLab.
References related to water activity theory and measurement techniques.
Instructions for mixing saturated salt solutions for calibration verification.
General| Water Activity Accuracy | ±0.003 aw |
|---|---|
| Water Activity Range | 0.030 - 1.000 aw |
| Measurement Time | 5 minutes |
| Display | LCD |
| Connectivity | USB |
To Next Page
