11
Warranty is void if not installed by a qualied technically trained person.
Damage can occur to the machine or bench if care is not taken at this point.
Heavy load, handle with care. Manual handling required - pallet truck, fork truck
or lifting apparatus recommended. Always wear suitable footwear and gloves.
3.1 Receiving Nexus/Stylus
Nexus/Stylus is shipped in a solid crate, containing 5 components and accessory kits. Please check all
components are not visibly damaged and in good condition prior to removing. In case of doubt please
contact your freight carrier and distributor/dealer immediately with notice of receipt.
Each component (CTU, UCU-H, UCU-E, UCU-T, UCU-P) will be unpacked and installed during the
installation process. UCU-E, UCU-H and UCU-T are all shipped as once piece on wheels. Before handling
the crate please note weight and size of crate will require a manual handling apparatus. Never tilt or roll
the crate as damage will occur to the equipment inside. Lifting should only occur on a solid at surface
with no obstructions. Prepare the work site and assess the task prior to starting the lift.
3.0 RECEIVING AND UNPACKING NEXUS/STYLUS
To Next Page