12
3.0 RECEIVING AND UNPACKING NEXUS/STYLUS
3.2 Unpacking Nexus/Stylus
1. Assess the working area and clear space of debris.
2. Prepare the correct tools. Electric drill with No.2 Phillips head driver or screw driver.
Note: The crate has been designed to open in a specic manner to allow ease of access.
3. The top, front and back of the crate should be removed rst using a screwdriver to remove screws.
4. Remove CTU by unscrewing the two inner locking panels and carefully removing. CTU can now slide
out on its plinth.
Take care when opening crate not to damage CTU. Under
NO
circumstances should a crowbar be used to open the crate.
NEVER place CTU upside down on hard surfaces without rst
providing clean padding.
To Next Page
Loading...