35
6.3 Technical Mode
6.0 PROGRAMMING AND SET UP
1. Auto Clean Cycle
- Press
to activate AUTOMATIC CLEANING CYCLE SELECT menu.
- Place one tablet of TEVO Cleaning Tablets in the blind lter basket (supplied in the accessories kit, these
can be reordered through info@aremde.com.au).
- Insert blind lter into the group head intended to carry out cleaning cycle.
- Press group head button twice to initiate cleaning cycle.
- Once cleaning cycle has completed screen will read 1W, 2W, 3W (3 group models only).
- Remove any residue from TEVO Cleaning Tablets from blind lter then press group head button twice to
initiate rinse cycle 1R, 2R, 3R (3 group models only).
- Once rinsing cycle of selected units has been completed, screen will display a blank screen.
Note: It is possible to carry out cleaning cycles in all group heads at a time. Please note that
group heads will need to have completed rinse cycle to return to standby mode.
Press then
key to view next functions or return to standby mode.
It is imperative that ONLY approved cleaning TABLETS be used in the Nexus/
Stylus. These can be ordered through info@aremde.com.au. Item #NX00339.
To Next Page
Loading...