AREMDE NEXUS - Page 36

36
2. Programming Doses
2.1 GROUP HEADS
Group doses on the Nexus/Stylus can be programmed one of two ways.
Method 1:
- Press
to activate PROGRAM DOSES SELECT menu.
- Press the group button you wish to program. Note: Press group button once to program dose one,
or twice to program dose two.
- Display will read VOLUME CC: XX
- Dose can be adjusted by using the
or keys.
Method 2:
- Press
to activate PROGRAM DOSES SELECT menu.
- Press the group button you wish to program. Note: Press group button once to program dose one,
or twice to program dose two.
- Display will read VOLUME CC: XX
- Once dose button (singe or double press) has been selected, push same group button once and
machine will deliver water to the group.
- Once required dose has been delivered, push group button once to stop water delivery.
- Display will show new dose amount which can be adjusted by the
or keys.
6.0 PROGRAMMING AND SET UP