AREMDE NEXUS - Page 37

37
- Press to conrm the programmed dose.
- Press the
key to cancel programming and programmed key will switch off.
- Press the the
key followed by the key to return to standby mode.
Note: In WEXUS models, CC units programmed will equal WEIGHT programmed.
Note: All selections can be programmed for a maxium of two minutes; after that time, display
screen will ash ERROR.
2.2 HOT WATER
- Press
to activate PROGRAM DOSES SELECT menu.
- Press Hot Water button. Display will read PROGRAM DOSES SECONDS X.X
- Dose can be adjusted by using the
or keys.
- Press
to conrm the programmed dose.
- Press the
key to cancel programming and programmed key will switch off.
- Press the the
key followed by the key to return to standby mode.
2.3 TRANSFERRING DOSES
Note: Doses can only be transferred using Group 1 dose settings.
- Press
to activate PROGRAM DOSES SELECT menu.
- Press
key to enter DOSES TRANSFER menu.
6.0 PROGRAMMING AND SET UP