58
9.0 CLEANING NEXUS/STYLUS
Group Heads
- Refer to section 6.2 AUTO CLEAN CYCLE on how to clean group heads using automatic cleaning function.
Shower Screens
- Loosen shower screen and remove screw/bolt.
- Remove the shower screen and attached diffuser. Take care when removing as surface will be HOT.
- Clean with soapy water (Cafetto cleaner supplied in accessories kit). Rinse with clean fresh water to
remove soapy residue.
- Screw back into the group. Take care to not over tighten as the screw could break off inside group head.
It is imperative that ONLY approved cleaning TABLETS be used in the Nexus/
Stylus. These can be ordered through info@aremde.com.au. Item #NX00339.
Please take care when removing the group showers - HOT SURFACE. Wide blade
athead screwdriver is required. Do not over tighten, never leave out overnight.
9.1 Operator Surfaces
-
To Next Page
Loading...