32
6.2 Barista Mode
6.0 PROGRAMMING AND SET UP
1. Auto Clean Cycle
- Press
to activate AUTOMATIC CLEANING CYCLE SELECT menu.
- Place one tablet of TEVO Cleaning Tablets in the blind lter basket (supplied in the accessories kit, these
can be reordered through info@aremde.com.au).
- Insert blind lter into the group head intended to carry out cleaning cycle.
- Press group head button twice to initiate cleaning cycle.
- Once cleaning cycle has completed screen will read 1W, 2W, 3W (3 group models only).
- Remove any residue from TEVO Cleaning Tablets from blind lter then press group head button twice to
initiate rince cycle 1R, 2R, 3R (3 group models only).
- Once rinsing cycle of selected units has been completed, screen will display a blank screen.
Note: It is possible to carry out cleaning cycles in all group heads at a time. Please note that
group heads will need to have completed the rinse cycle to return to standby mode.
- Press then
key to view next functions or return to standby mode.
It is imperative that ONLY approved cleaning tablets be used in the Nexus/Stylus.
These can be ordered through info@aremde.com.au. Item #NX00339.
To Next Page
Loading...