54
8.0 OPERATING WEXUS - NEXUS MODELS ONLY
8.4 Wexus Settings
Note: Perform the following tasks with Nexus Powered OFF.
1. With Wexus powered off, enter settings by pressing and holding the power button. When the LED
display Shows [ :ACAIA ] and then [ SEt ], release the power button and then tap the tare button.
2. The scale will now display [0000], long press tare button 4 times to enter settings menu.
3. Scroll through the following functions by pressing the tare button.
Sleep Timer Setting [ SLEEP ]
1. This number indicates the amount of time before the scale automatically powers off.
Zero Tracking Setting [ trAcE ]
1. Zero Tracking is a function for maintaining the zero indication within certain limits
automatically.
2. 0.5 d~3 d: For example, for standard resolution each division is 0.1 g, 3 d = 0.3 g. When Zero Tracking
is set to be 3 d, any initial weight between +/- 0.3 g on the weighing pan would be zeroed out gradually.
Key Sound Setting [ bEEP ]
1. Set the Key Sound function off to turn off the beeping sound or on to turn on the beeping
sound.
To Next Page