57
8.0 OPERATING WEXUS - NEXUS MODELS ONLY
2. The number indicates the time in seconds it will take for the scale to reset if no espresso ow or weight
is detected.
8.5 Cleaning Wexus
8.6 Charging Wexus
Wexus can be cleaned with a damp cloth, always wipe down surface. Hot water will discolour the plastic
over time.
Do not submerge into water or pour water directly on to the surface of scale.
Irreversible damage can occur. Aremde recommends catching the water in a
small vessel to reduce wear and damage to the Wexus.
Beware not to hold the power button down while plugging into charging cable as it
may cause the device to reset or lock out user. For further support please contact
your service provider or email info@aremde.com.au.
A Micro USB cable is supplied with each Wexus scale. Please keep scales charged when not in use.
If the scale is in update mode and no function is performed the scale will revert to standby after 60
seconds.
Note: Please remove scale from working area when charging to avoid any accidental water
damage.
To Next Page
Loading...