68
12.0 TROUBLESHOOTING
Why won’t my machine auto tare with Wexus?
Please make sure scale is in Brewing Mode (square mode). Hold down On/Off to scroll through function
modes.
How do I clean the group heads?
Please refer to section 6.2 AUTO CLEAN CYCLE on how to clean group heads using automatic cleaning
function. Please note only slow release cleaning tablets are compatible with Nexus/Stylus.
1. Barista menu.
2. Scroll to ‘AUTO CLEAN’ then enter.
3. Double press group button to activate clean cycle. This function will be activated for two minutes.
4. Remove blind lters.
5. Double press group button to activate rinse cycle. This function will be activated for 2 minutes.
6. Once all groups have stopped cleaning press ‘UP’ and ‘RESET’.
Why is my machine leaking in automatic cleaning mode?
Please make sure only Aremde approved slow release cleaning tablets are used. These can be ordered
directly from Aremde at info@aremde.com.au or most online coffee equipment retailers.
To Next Page
Loading...