AZI Sales/Customer Service 800-528-7411 or 602-470-1414 or support@azic.com Page 38 of 105
• Close the lid, and the instrument
weighs the sample.
• The test proceeds to dry the sample.
For a WEIGHT test only, immediately
after the instrument weighs the
sample, gently open the lid, carefully
remove the 3-gram weight, and gently
close the lid.
• The test finishes once the ending criteria has been met, as shown below left.
If performing WEIGHT tests: When the WEIGHT test completes, the final test result
screen indicates Pass or Fail by a Green or Red background respectively and a PASS
or FAIL below the result, as shown below right.
• Open the lid and remove the sample.
• Place a new/clean sample pan on the pan support to get ready for the next test.
• Close the lid when the heat chamber is cool.
To Next Page
Loading...
Need help?
General
