Arizona Instrument COMPUTRAC MAX 4000 User Manual

AZI Sales/Customer Service 800-528-7411 or 602-470-1414 or support@azic.com Page 83 of 105
8.6.2 Optimize Existing Test Program
To get here, navigate:
[MENU]PARAMETER EXPERT MENU
OPTIMIZE EXISTING TEST PROGRAM
Parameter Expert (PE) can optimize an
existing Test Program by allowing the
user to slightly change the test
temperature while PE determines the
proper ending criteria. A higher test
temperature improves test speed while a
lower test temperature improves test
repeatability.
The current selected Test Program will be
optimized. If this is not the desired Test
Program, exit PE and select the proper
Test Program from the Test Program
menu and then return to PE.
PE queries information on the current
sample:
• TARGET RESULT – Enter the
reference method result.
• NEW TEMP – Enter a new desired
temperature or keep it the same to
readjust the current ending criteria.

Arizona Instrument COMPUTRAC MAX 4000 Specifications

General

Brand	Arizona Instrument
Model	COMPUTRAC MAX 4000
Category	Measuring Instruments
Language	English