AZI Sales/Customer Service 800-528-7411 or 602-470-1414 or support@azic.com Page 73 of 105
8.4.3 Date/Time Setup
To get here, navigate:
[MENU]SETUP MENUDATE/TIME SETUP
Use this function to change the time at
initial setup or when changing for daylight
savings time. Time is in a 24-hour format.
An internal battery maintains the correct time and date when the power is off. If an “RTC
Battery Failure” occurs and/or the clock resets when the power is turned off and on, the
internal backup battery may need to be replaced. If this happens, call AZI Customer
Service. A battery failure does not affect the instrument’s Test Programs, Test Results or
configuration options stored in memory because this information is stored in non-volatile
memory and is not dependent on the battery.
8.4.4 Ethernet Setup
To get here, navigate:
[MENU]SETUP MENUETHERNET SETUP
An optional Web Server can be
purchased for the MAX
®
4000XL, and
then the instrument can be accessed
from your local area network (LAN) or
intranet by a Windows
®
PC with Internet
Explorer
®
version 6 or higher. The
Ethernet Setup menu provides the
necessary options to configure this
connection. Generally, the MAX
®
4000XL cannot be viewed on the Internet
because of company firewalls, but it is
possible and requires a registered IP
address.
After making changes in the Ethernet Setup menu, press [ESC] until back at the Main
Menu, and then cycle the instrument power off and on to save the changes.
If the web server option is not purchased, the MAX
®
4000XL can still be accessed over
the intranet to test the LAN connection, but reports, data, and other functionality will not
be available.
To Next Page
Loading...
Need help?
General
