AZI Sales/Customer Service 800-528-7411 or 602-470-1414 or support@azic.com Page 8 of 105
ENVIRONMENTAL CONDITIONS
• STORAGE AND SHIPPING
o Temperature should be between 0 °C and +40 °C (+32 °F and +104 °F).
o Relative Humidity should be between 10% and 80%.
• OPERATIONAL CONDITIONS – INDOOR USE.
o Optimum results will be achieved when the instrument is set on a smooth, level,
non-vibrating surface in a non-condensing, non-explosive environment of 0 - 40 ºC
at 50% relative humidity or 0 - 30 ºC at 80% relative humidity.
o Do not expose the instrument unnecessarily to extreme temperatures, moisture,
shocks, blows or vibration.
WARNING SYMBOLS
Protective Ground:
Identifies the connection on the chassis and power inlet module for the
safety ground (green/yellow) wire connection.
Warning:
Observe information or procedures
Electrical Shock Hazard:
Observe all steps of the procedure to prevent electrical shock.
Warning - Hot surface or area of possible severe burns:
Use listed precautions when opening the oven lid and handling samples to
prevent injury.
To Next Page
Loading...
Need help?
General
