Arjo Auralis - Technical specifications; Pump specifications; Battery and electrical specifications

TECHNICAL SPECIFICATIONS52
7HFKQLFDOVSHFL¿FDWLRQV
AURALIS PUMP
Model: Auralis
Case material: PC ABS
Part number: 636xxx (xxx is determined by the type of mains lead
¿WWHG3OHDVHUHIHUWRUHDUODEHOIRUDFWXDOSDUWQXPEHU
Size: 385 x 290 x 170 mm (15.2 x 11.4 x 9.7 in)
Weight: 5 kg (11 Ib)
Plug Fuse Rating: 5A to BS1362 (UK only)
Degree of protection against electric shock: Mains Connected: Class II, Double Insulated without
Functional Earth
Type BF
Degree of protection against liquid ingress: IP21
Protection against ingress of solid objects more than
12.5 mm diameter and water droplets falling vertically.
Mode of operation: Continuous
Alternating Mode Cycle Time: 10 minutes (Alternate 10 minutes,
$XWR¿UPPLQXWHV&/3FRQWLQXRXV
BATTERY
Battery type: Li-ion, non-removable
Voltage: 14.4 V
Capacity: 2200 mAh
Battery life: 300 cycles minimum
ELECTRICAL
Supply voltage: 100-230 V
Supply frequency: 50-60 Hz
Power input: 4-58 VA
OPERATING CONDITIONS
Temperature (Ambient): 5 °C to 40 °C (41 °F to 104 °F)
Relative humidity range: 15 % to 90 % (non-condensing)
Atmospheric pressure: 700 hPa to 1060 hPa
If the Auralis pump is stored in conditions outside the operating ranges, allow time for its temperature to
stabilise to normal before use. Allow a minimum of 8 hours if the Auralis pump is stored at -20 °C or 60 °C.