Arjo Maxi Sky 2 PLUS - Entering the X-Y System

001-31249-EN rev. 3
Operating the Maxi Sky 2 Plus in Dual Mode 31
Fig. 60
Fig. 61
Fig. 62
3) Move the Maxi Sky 2 Plus through the gate and
onto the adjacent fixed tracks.
Note: The mobile tracks will remain in the locked
position. In order to release the mobile tracks, refer
to the "Entering the X-Y System" section below.
Entering the X-Y System
When entering the X-Y system from connecting
fixed tracks, the X-Y's mobile tracks will already be
locked and in place.
1) Pass the ceiling lift through the gate.
When the Maxi Sky 2 Plus has passed the
deactivation stations, the gate will release,
permitting the mobile tracks to move along the
X-Y's stationary tracks again.
2) Move the Maxi Sky 2 Plus to the desired
location.