Arjo Maxi Sky 2 PLUS - Operating in Single Mode; Single Mode Movement and Sling Use

001-31249-EN rev. 3
Operating the Maxi Sky 2 Plus in Single Mode 35
Operating the
Maxi Sky 2 Plus in Single Mode is
achieved with the aid of the command buttons on
the hand control.
Vertical Movement
• The and buttons are used to raise or
lower the patient. Auxiliary buttons can also
be used.
Horizontal Movement and Rotation
Horizontal movement, as well as rotating the
patient, is achieved by manually pulling or pushing
the ceiling lift to the desired location.
Fig. 79
Patient Positioning
Patient positioning can be performed using a
spreader with the Powered Dynamic Positioning
System (PDPS).
In Single Mode, the
and buttons are used
in conjunction with compatible PDPS spreader
bars to position patients in either the sitting or lying
position.
Fig. 80
Use of Slings and Spreader Bars in Single
Mode
Once in Single Mode, the Maxi Sky 2 Plus acts as
a stand-alone Maxi Sky 2 ceiling lift. All slings and
spreader bars compatible with the Maxi Sky 2 are
equally compatible with the
Maxi Sky 2 Plus in
Single Mode. For a complete list, and for
instructions on how to transfer patients, please
refer to the
Maxi Sky 2 Instructions for Use (001-
15698-XX).
Operating the Maxi Sky 2 Plus in Single Mode