Chapter 1
ARM
®
DSTREAM-ST system design guidelines
The ARM
®
DSTREAM-ST debug and trace unit enables powerful software debug and optimization on
an ARM processor-based hardware target. Use the information in this chapter to design your own ARM-
architecture-based devices and Printed Circuit Boards (PCBs) that can be debugged using the
DSTREAM-ST unit.
It contains the following sections:
• 1.1 Reset signals on page 1-13.
• 1.2 Working with Application-Specific Integrated Circuits (ASIC) or System-on-Chips (SoC)
on page 1-15.
• 1.3 Physical and electrical connection guidelines on page 1-17.
ARM 100893_0100_00_en Copyright © 2017 ARM Limited or its affiliates. All rights reserved. 1-12
Non-Confidential
To Next Page
Loading...
