5-8 CHP Max™ Headend Optics Platform Chassis, Controllers and Power Supplies Rev D
Restore Factory Settings Restores all parameters to the factory-shipped configuration.
Status and Settings tab
+12 VDC Displays the 12V
DC output voltage.
Configure Sets major low, minor low, minor high, and major high alarm limits.
Show info Lists the four alarm thresholds and graphical display configuration
information.
Show history Displays a graph of the output voltage vs. time.
Save history Saves output voltage data points vs. time to an Excel file format.
+5 VDC Displays the 5V
DC output voltage.
Configure Sets major low, minor low, minor high, and major high alarm limits.
Show info Lists the four alarm thresholds and graphical display configuration
information.
Show history Displays a graph of the output voltage vs. time.
Save history Saves output voltage data points vs. time to an Excel file format.
+3.3 VDC Displays the 3.3V
DC output voltage.
Configure Sets major low, minor low, minor high, and major high alarm limits.
Show info Lists the four alarm thresholds and graphical display configuration
information.
Show history Displays a graph of the output voltage vs. time.
Save history Saves output voltage data points vs. time to an Excel file format.
–5 VDC Displays the –5V
DC output voltage.
Configure Sets major low, minor low, minor high, and major high alarm limits.
Show info Lists the four alarm thresholds and graphical display configuration
information.
Show history Displays a graph of the output voltage vs. time.
Save history Saves output voltage data points vs. time to an Excel file format.
Fan 1 current Displays fan 1 current in mA.
Configure Sets major low, minor low, minor high, and major high alarm limits of fan
1 and 2 currents.
Show info Lists the four alarm thresholds and graphical display configuration
information.
Show history Displays a graph of fan 1 current (mA) vs. time.
Save history Saves fan 1 current data points vs. time to an Excel file format.
Table 5.3 Controls and Functions of the Craft Management Software (cont’d)
Control Function
To Next Page
Loading...
Need help?
General
