Arris SB6183 - Chapter 3: Installing Your SB6183; Connecting Modem to Computer

Chapter 3
Installing your SB6183
CAUTION: This product is for indoor use only. Do not route the Ethernet cable(s)
outside of the building. Exposure of the cables to lightning could create a safety
hazard and damage the product.
Before starng the installaon, make sure of the following:
■ You have all the Addional item(s) needed (not included) (page 9)
■ You have to Establish an Internet connecon (page 14)
■ Cable, phone, and power outlets are available near the SB6183.
If a cable outlet is not conveniently located, your service provider can install a new one.
■ Broadband cable service is available in your area.
To set up a Wi-Fi network, you will need a router and high-speed Internet connecon
provided by Comcast.
You can set up your cable modem in one of the following ways.
● Using the Suroard Central app (SBC app): It is recommended that you install and
set up your cable modem using the SBC app. For details on how to set up, refer to
the SURFboard Central User Guide for Cable Modems available on the hp://
www.arris.com/selelp.
● Using client device (laptop/desktop): If you are using your client device (laptop/
Desktop) with a wired Ethernet connecon, then see Connect the SB6183 to your
computer (page 13).
Connect the SB6183 to your computer
Before installing the SB6183:
■ Check with your service provider to ensure broadband cable service is available in your
area.
■ Choose a locaon in your home where your computer and cable modem are preferably
near exisng cable and electrical wall outlets.
SURFboard
®
SB6183 DOCSIS
®
3.0 Cable Modem User Guide STANDARD Revision x.4 13