Chapter 4: Installing and Connecting your Data Gateway
Release 34 DRAFT 1.6 June 2017 Touchstone DG3450 Data Gateway User Guide
© 2017 ARRIS Enterprises LLC. All Rights Reserved. 18
Rear Panel
The rear of the Data Gateway has the following connectors and controls.
1. Reset button: resets the Data Gateway as if you power cycled the unit. Use a pointed
non-metallic object to press this button.
2. USB: USB host connector - future support for external USB devices.
3. Ethernet (1 - 4): connectors for use with a computer LAN port.
4. MoCA LED: indicates the status of the MoCA connection.
5. Cable: connector for the coaxial cable.
6. Power: connector for the power cord.
Selecting an Installation Location
There are a number of factors to consider when choosing a location to install your Data
Gateway:
Is an AC outlet available nearby? For best results, the outlet should not be switched and
should be close enough to the Data Gateway that extension cords are not required.
To Next Page
Loading...
