Need help?Do you have a question about the Artistic Licence micro-scope 3a and is the answer not in the manual?
Provides essential steps for initial setup and operation of the Micro-Scope.
Lists the key functionalities and capabilities of the Micro-Scope device.
Highlights new features and improvements specific to the Micro-Scope 3a model.
Explains the operation of the MENU, TOGGLE, LEFT/RIGHT, and UP/DOWN buttons.
Shows DMX512 signal data in various display formats.
Covers transmitting and editing stored show memories.
Details procedures for testing DMX512 cables and network integrity.
Accesses device settings like backlight, power saving, and menu customization.
Introduces the Mic-Edit software and guides through its installation process.
Lists PC requirements, communication setup, and the main Mic-Edit interface.
Covers DMX patching, editing memories via spreadsheet or faders.
Explains how to edit fixture personalities and configure Micro-Scope settings.
Details exporting data and using live DMX editing features.
Details the internal battery, external power supply, and connector pinout.
Explains power switch function, data protection, and battery charging/maintenance.
Details the pinout for DMX receive and transmit connectors.
Provides the wiring plan for constructing a MIDI adapter cable.
Provides essential steps for initial setup and operation of the Micro-Scope.
Lists the key functionalities and capabilities of the Micro-Scope device.
Highlights new features and improvements specific to the Micro-Scope 3a model.
Explains the operation of the MENU, TOGGLE, LEFT/RIGHT, and UP/DOWN buttons.
Shows DMX512 signal data in various display formats.
Covers transmitting and editing stored show memories.
Details procedures for testing DMX512 cables and network integrity.
Accesses device settings like backlight, power saving, and menu customization.
Introduces the Mic-Edit software and guides through its installation process.
Lists PC requirements, communication setup, and the main Mic-Edit interface.
Covers DMX patching, editing memories via spreadsheet or faders.
Explains how to edit fixture personalities and configure Micro-Scope settings.
Details exporting data and using live DMX editing features.
Details the internal battery, external power supply, and connector pinout.
Explains power switch function, data protection, and battery charging/maintenance.
Details the pinout for DMX receive and transmit connectors.
Provides the wiring plan for constructing a MIDI adapter cable.
General| RDM Support | Yes |
|---|---|
| DMX Outputs | 1 |
| DMX Inputs | 1 |
| Protocols Supported | DMX512, RDM |
| Power Source | Internal rechargeable battery or USB power |
| Display | OLED |
| Input Voltage Range | 5 VDC |
| Operating Temperature | 0°C to 40°C |
| Housing | Plastic |
To Next Page