Artistic Licence Engineering Ltd. Micro-Scope 3a user guide
Mic-Edit is a Windows application that provides the following
functionality. Mic-Edit is an optional product that enhances Micro-
Scope. It is ordered separately.
Provides an on-line editor that allows live programming of moving
lamps (preview of levels only)
Provides an off-line editor allowing all Micro-Scope 3a Memories
and configuration data to be programmed in a console style
format.
Provides a Moving Lamp personality editor.
Provides file compatibility with other Artistic Licence products.
Mic-Edit is compatible with Windows 95, 98, ME, NT5, 2000 & XP.
Mic-Edit is installed as follows:
Insert the CD and select the ‘Enter CD’ option.
Click the ‘Software’ button, followed by the ‘Mic-Edit’ button.
Select the ‘Run this program from its current location’ option
and press ‘OK’.
Dependent upon your computer setup, you may see a security
warning. Click on the ‘Yes’ button to continue.
The Install Shield program will start and guide you through the
remaining steps of the installation procedure.
Mic-Edit requires the following minimum specification to run:
Pentium at 133mhz or higher PC Compatible.
Windows operating system.
Mouse.
VGA 640 x 480 or better.
10 MByte Hard disc space.
32 MByte ram.
Serial (RS232) port with 9 pin connection.
To Next Page
Loading...