Artistic Licence micro-scope 3a - DMX AND MIDI CONNECTIVITY; DMX RECEIVE AND TRANSMIT PINOUTS; MIDI ADAPTER WIRING

Artistic Licence Engineering Ltd. Micro-Scope 3a user guide
68 / 73
RECEIVE
DMX
The DMX receive input connects via the male 5 pin XLR. The pin
allocation is as follows:
Pin
Function
Pin 1
Screen
Pin 2
DMX Receive Signal-
Pin 3
DMX Receive Signal+
Pin 4
MIDI Receive Anode
Pin 5
MIDI Receive Cathode
The MIDI receive feature of Micro-Scope uses pins 4 & 5 which
are undefined by the DMX512 protocol. These pins may be
disconnected internally should this conflict with your DMX512
implementation.
MIDI ADAPTER
WIRING
A MIDI adapter cable is available from Artistic Licence or can be
simply constructed from the following wiring plan:
Female 5 pin XLR
Female 5 pin DIN
Pin 1 connect to screen
No connection
Pin 4
Pin 4
Pin 5
Pin 5
TRANSMIT
DMX
The DMX transmit output connects via the female 5 pin XLR. The
pin allocation is as follows:
Pin
Function
Pin 1
Screen
Pin 2
DMX Transmit Signal-
Pin 3
DMX Transmit Signal+
Pin 4
Scope Trigger Output
Pin 5
Scope Trigger Ground