Artistic Licence Engineering Ltd. Micro-Scope 3a user guide
The header to the spreadsheet allows overall configuration of the
fixture:
The name of the file that contains this
fixture personality.
Used to enter the total number of channels
required by this fixture.
This is the 16 character name of the
fixture.
Defines whether the fixture uses red,
green, blue or cyan, magenta, yellow colour
mixing.
If this box is ticked, Micro-Scope will
include all the Aux attributes in the
automatic tests. Generally you will not select
this as the Aux attributes are used for
controls needed to make the entire lamp
operate.
Three options of speed for the automatic
test ramp are provided. Generally you would
use Slow to Normal for moving heads and
Normal to Fast for moving mirrors.
This field is provided to document revisions
to the personality.
To Next Page
Loading...