The DARK CHANNEL menu is used to set the level to be
transmitted in place of zero
(dark) channels when
operating in either Rig Check
or Transmit Dynamic Mode.
This is effectively a preheat feature and can significantly improve
lamp life.
The UP DOWN keys are used to increment or decrement the level.
The MEMORY DISPLAY menu is used to select between the two
possible display modes of the
TRANSMIT MEMORY
function.
When LAMP mode is selected, channels are displayed in terms of
their associated moving lamp attribute.
In NUMERIC mode, channels are displayed with levels shown in
decimal, binary, hexadecimal and percent.
To Next Page
Loading...