Artistic Licence micro-scope 3a - Page 54

Artistic Licence Engineering Ltd. Micro-Scope 3a user guide
54 / 73
Entry
Name
Purpose
7
Exclude CONTROL
channels of this fixture
If the selected channel is part
of a moving lamp and it is a
control (lamp strike etc.)
channel, all control channels of
the lamp are set to zero in
this Memory.
8
Exclude all INTENSITY
channels from Memory
If the selected channel is part
of a moving lamp and it is an
intensity channel, all intensity
channels in this Memory are
set to zero.
9
Exclude all POSITION
channels from Memory
If the selected channel is part
of a moving lamp and it is a
position channel, all position
channels in this Memory are
set to zero.
10
Exclude all COLOUR
channels from Memory
If the selected channel is part
of a moving lamp and it is a
colour channel, all colour
channels in this Memory are
set to zero.
11
Exclude all BEAM
channels from Memory
If the selected channel is part
of a moving lamp and it is a
beam channel, all beam
channels in this Memory are
set to zero.
12
Exclude all CONTROL
channels from Memory
If the selected channel is part
of a moving lamp and it is a
control channel, all control
channels in this Memory are
set to zero.
13
Clear Memory to zero
Sets all channels to zero level.
14
Clear Memory to off
Sets all channels to zero level.
15
Remove fixture from
patch
Removes this fixture from the
patch.