Arturia CS-80V - Saving Presets

ARTURIA – CS-80V – USER’S MANUAL
73
Connection of a MIDI track to the CS-80V
The MIDI events played on a MIDI keyboard are then transmitted by your sequencer to
the CS-80V. It is of course possible to record these MIDI events, and use the entire MIDI
editing options of the sequencer.
8.2.4 Saving presets
When the session is saved, the state of the CS-80V is saved as is, even if the
programming corresponds to no preset. For example, if you were working on a preset
«BassOne» on which you had changed settings (without saving them as «BassTwo»), the
next time you open the song, the CS-80V will load the preset «BassOne» plus the
changes.
The drop down menu offered within the VST sequencer which saves the settings of a
plug-ins is of course compatible with the CS-80V. Nonetheless it is strongly
recommended that you use the internal menu of the CS-80V: the presets saved in this
manner can be used in any other mode (standalone or other sequencer), and can be
exported as a separate file.
8.2.5 Automation
Automation works with the CS-80V like any other VST plug-in (see the VST sequencer
documentation for more details on plug-in automation). Preset changes, however cannot
be automated.