ARTURIA – CS-80V – USER’S MANUAL
78
The MIDI events played on a MIDI keyboard are then transmitted by Sonar to the CS-
80V. It is of course possible to record these MIDI events, and use the entire MIDI editing
options available in Sonar.
8.4.4 Saving presets
When the session is saved, the state of the CS-80V is saved as is, even if the
programming corresponds to no preset. For example, if you were working on a preset
«BassOne» on which you had changed settings (without saving them as «BassTwo»), the
next time you open the song, the CS-80V will load the preset «BassOne» plus the
changes.
8.4.5 Automation
Automation with Sonar works simply by reception and recording of MIDI messages of the
type Control Change. You can configure the reception of MIDI events by the CS-80V in
the same way as standalone mode. The sequencer takes care of recording the continuous
controls transmitted to the CS-80V, and lets you edit them.
To Next Page
Loading...