Aruba Instant On 1930 Series User Manual

NOTE: The 1930 switches do not have a power switch. They are powered on when the power
cord is connected to the switch and to a power source. For safety, locate the switch
installation near the power outlet.
The switches automatically adjust to any voltage between 100-127 or 200-240 volts and
either 50 or 60 Hz. There are no voltage range settings required.
2. Check the LEDs on the switch as described below.
1 Port Link/Act, Speed, and PoE status LEDs
2 Global Status LED
Chapter 4 Installation overview 25

Aruba Instant On 1930 Series Specifications

General

Model	Aruba Instant On 1930 Series
Switching Capacity	Up to 176 Gbps
Layer	Layer 2+
MAC Address Table Size	16K entries
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Ports	8, 24, or 48 10/100/1000BASE-T ports
Uplink Ports	2 or 4 SFP/SFP+ ports
PoE Options	PoE and non-PoE models available
Management	Cloud-managed with Aruba Instant On mobile app or web portal
Mounting	Rack-mountable
Jumbo Frame Support	9216 bytes
Layer 2 Features	VLANs
Security Features	Access Control Lists (ACLs)
Power Supply	Internal power supply
Humidity	15% to 95% non-condensing
Certifications	CE