Aruba Instant On 1930 User Manual

NOTE: The 1930 switches do not have a power switch. They are powered on when the power
cord is connected to the switch and to a power source. For safety, locate the switch
installation near the power outlet.
The switches automatically adjust to any voltage between 100-127 or 200-240 volts and
either 50 or 60 Hz. There are no voltage range settings required.
2. Check the LEDs on the switch as described below.
1 Port Link/Act, Speed, and PoE status LEDs
2 Global Status LED
Chapter 4 Installation overview 25

Aruba Instant On 1930 Specifications

General

Model	Aruba Instant On 1930
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Uplink Ports	2 or 4 SFP/SFP+ ports
Management	Aruba Instant On cloud-based management
Layer 2 Features	VLAN, QoS, LACP, IGMP snooping, STP/RSTP/MSTP
Layer 3 Features	Static Routing
Power Supply	Internal (100-240V AC)
Certifications	RoHS