ascom Ascotel 2025/2045/2065
2.190 Call Routing HBT_20321104_02/B0_en
Tab. 2.62: Routing parameter settings
Parameter Parameter value
Trunk group 1:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Public
• Protocol DSS1
• Direct dialling plan 1 (number of a direct dialling plan)
• Call distribution element 1 (relevant only if no suitable DD number is found)
Direct dialling plan 1:
• DD number 30 2 (reference number of a call distribution element)
Call distribution element 2:
• Destinations Switching position 1: 330 (PISN subscriber)
• Incoming connections Number of connections allowed simultaneously
Subscriber configuration PISN SC 330:
• Route 2 (route reference number)
• Number Not relevant in this case
Route 2:
• Trunk groups 2 (reference number of one or more trunk group(s))
• Digit barring Use or do not use digit barring
• Outgoing connections Number of connections allowed simultaneously
• Numbering plan identifier NPI PNP
• Type of number TON Unknown
Trunk group 2:
• Network interfaces Network interfaces of this trunk group
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO