ASCOM Ascotel 2025 - Remote Controlling Features from Outside the System

ascom Ascotel 2025/2045/2065
2.416 Features HBT_20321104_02/B0_en
8.6.2 Remote Controlling Features from outside the System
An external subscriber A use a DDI number specially set up for remote control and
a password valid throughout the system to remote control a group of features via
the public ISDN network (External Remote Control or ERC). The features con-
cerned can be either subscriber-related features of a subscriber B (Tab. 2.282) or
system-related features (Tab. 2.283).
Detailed Description
Tab. 2.286: Externally remote-controllable features and system functions
Procedures
Tab. 2.287: External remote control: Procedure
Inter-
face
Operating sequence / signalling on the terminal Scope
A • A dials the call number for remote control
• After 5 seconds of ringing the connection is
established and A obtains the internal idle
tone. The PBX automatically switches to DTMF
mode.
• A enters his password.
• A once again obtains the internal idle tone;
the PBX automatically deactivates the DTMF
mode.
• A dials *06 ... (as for internal remote control).
Possible interfaces:
• Public ISDN network
Requirements:
• DTMF-compatible telephone.
• Valid password
B Requirement:
• Authorization for remote control access
*/# procedure
Change */# procedure using external
remote control
<DDI No.>< Password> #*06 <SC No.> <*/# procedure>