ASCOM Ascotel 2025 - Default Settings on the Test Handsets

ascom Ascotel 2025/2045/2065
3.62 Planning DECT Systems HBT_20321104_03/B0_en
Configuration with 1 Radio Unit
Fig. 3.28: Configuration with 1 radio unit
Used for:
• Terminating area at the limit of the planned supply ranges
• Miniature system
• Re-measuring the system already in operation (planning usually carried out by
1 person)
5.5.2 Default Settings on the Test Handsets
The following logon procedures needs to be carried out so that the handsets can
laterbe used anywhere in the test itinerary. These procedures ensure that both
test handsets can be called on both test radio units using in each case their inter-
nal number. One test radio unit is designated as "A", the other as "B".
Supplied condition of the test kit test handsets
• Handset 1 is logged on to test radio unit "A and B” as subscriber 1.
• Handset 2 is logged on to test radio unit "A and B” as subscriber 2.
7
4
1
S
T
U
J
K
L
A
B
C
0
0
.
.
.
9
8
5
2
D
E
F
M
N
O
V
W
X
9
6
3
G
H
I
P
Q
R
Y
Z
•
M
C
E
n
d
Standard
handset 1
Test radio unit B
230 VAC
haz0342aaenb0