ASCOM Ascotel 2025 - Configuration with AIMS

ascom Ascotel 2025/2045/2065
HBT_20321104_05/B0_en AIMS Configuration Tool 5.11
2.4 Configuration with AIMS
With AIMS the configuration of a PBX can be directly loaded and processed. The
complete configuration of a PBX can also be created on the PC without access to
the PBX and stored in the database. The prepared configuration can then be
loaded on to the PBX.
Setting up the Connection
1. Open the AIMS Shell.
2. Select the PBX.
3. Under "PBX: Online Connection" select "Local Access", "Dial-up Access" or
"LAN".
4. Select the dial-up networking connection under "Online Connection" in the
menu "View" "Options":
– Under "Local AIMS PBX Connection" select the dial-up networking con-
nection for local access or
– under "AIMS PBX Connection via ISDN" the dial-up network connection
for dial-up access.
5. Log on to the PBX via the login (password).
6. Select "Connection" from the "File" menu.
7. Open the Configuration Manager and configure the PBX.
Clearing down the Connection
1. Save the database.
2. From the "File" menu select "Disconnect".