ASCOM Ascotel 2025 - Creating the Routes; Replicating the Systems on Routes

ascom Ascotel 2025/2045/2065
3.110 Planning a Private Network HBT_20321104_03/B0_en
6.2.1 Creating the Routes
6.2.1.1 Replicating the Systems on Routes
A route always defines a destination. A destination is either a system in the net-
work or a connection to the public network. You need to create as many routes
as there are destinations. For a clearer overview, in each system the same route is
always used for the same destination, i.e. one route is reserved for each destina-
tion.
Fig. 3.64: One route is reserved for each destination
haz0807aaena0
PINX 2
(destination
of route 6)
PINX 3
(destination
of route 7)
R
o
u
t
e
1
R
o
u
t
e
5
R
o
u
t
e
6
PINX 1
(destination
of route 5)