ASCOM Ascotel 2025 - Exchange Access Authorizations; Operating the Features on the Terminal

ascom Ascotel 2025/2045/2065
2.300 Features HBT_20321104_02/B0_en
8.1.5 Exchange Access Authorizations
Exchange Access Authorization
Exchange-to-exchange connections have to be authorized to enable the features
conference, call diversion and call transfer between two external subscribers.
Authorization to Transfer Exchange-to-Exchange Functions to the
Exchange
For exchange-to-exchange three-party connections to be transferred to the
exchange, the relevant authorizations have to be enabled in the trunk group con-
figuration.
For exchange-to-exchange call diversions to be transferred to the exchange, the
relevant authorizations have to be enabled in the trunk group and subscriber con-
figurations.
8.1.6 Operating the Features on the Terminal
Feature Activation
With system terminals, features can be operated in the following ways:
• Menu-supported with Foxkey, for all system terminals with a display and for the
PC Operator
• Using the Foxkey alone, for system terminals without a display
• Using function keys (see Tab. 2.123)
• With suffix dialled digits, in a specific connection status (e.g. suffix dialling digit
2 switches back and forth between 2 connections)
With commercially available system terminals by other manufacturers, features
can be operated in the following ways:
• ISDN terminals:
– By menu for ISDN services supported by the system on the S bus as per ETSI
(see Tab. 2.296 and Tab. 2.297)
– With */# procedures
• Analogue terminals: With */# procedures or control key