ascom Ascotel 2025/2045/2065
HBT_20321104_01/B0_en Networking the Systems 1.41
4.5.2 Connection via Ethernet Interface
PINX connections are connected to the Ethernet interface of the IPI-100 special
card. QSIG / PSS1 over IP (NoIP) is used as the protocol. For more details on this
connection type, see AIP 6400 System Manual.
Fig. 1.28: Ethernet connection (NoIP) between 2 PINXs
Ethernet Ethernet
IP
PINX 2
IPI
PINX 1
IPI
haz1200aaena0
To Next Page