ASCOM d41 Configuration Manual

TD 92641EN
21 June 2012 / Ver. G
Configuration Manual
Ascom d41 DECT Handset
7
performed. The handset’s User ID will automatically be set to the same as the
extension number.
Tip: The User ID can be viewed in the handset by navigating to the menu:
Admin menu > Device info > User ID.
See also examples of handset configurations that can be made in chapter 5 Handset
Configuration on page 16.
Subscribe the handset
1 Assign an extension number in the DECT/IP-DECT system for the handset. See the
corresponding manual for the DECT/IP-DECT system.
2 Subscribe the handset towards the DECT/IP-DECT system. The subscription procedure
is described in User Manual, Ascom d41 DECT Handset, TD 92582EN.
In order to easily identify the handset, both the IPDI and the User ID are shown in the
handset when initiating the subscription procedure.

ASCOM d41 Specifications

General

Type	DECT telephone
Answering machine	No
Mounting type	-
Product color	Gray
Speakerphone	Yes
Phonebook capacity	500 entries
Languages support	CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, NOR, POL, POR, RUS, SLK, SWE, TUR
Standby time	180 h
Battery recharge time	4 h
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Number of handsets included	1

Weight and Dimensions

Depth	24 mm
Width	53 mm
Height	133 mm