EasyManua.ls Logo

ASCOM d41 - 6.3 During a Call

ASCOM d41
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TD 92641EN
21 June 2012 / Ver. G
Configuration Manual
Ascom d41 DECT Handset
24
5.14 Disable Homebase GAP Registration
When the feature is enabled, it is not possible to register to a home base.
Using the "Edit template" feature in the PDM, the parameter can be found at
Systems > Home_Base_Subscription.
The parameter shall be set to "Enable" for registration of a new base station. The default
value is "Disable".
5.15 Require Encrypted Base Station
The handset can be configured to establish calls via encrypted base stations only. This is
used to avoid snooping in the telephony network.
Requirements:
The encryption is enabled in the base station. See corresponding manual for the base
station.
If Ascom´s base station is used, the software version must be 3.1.x or greater.
The handset software version must be 2.9.7 or greater.
Using the "Edit template" feature in the PDM, the parameter can be found at
Systems > Encryption required.
When the parameter is set to "Yes", it is only possible to establish calls via encrypted base
stations. The default value is "No".
5.16 Protect registration from user deletion
It is possible to protect or unprotect a registration from deletion via the handset menu by
altering the parameter “Protected flag”. In a template/Number in PDM/IMS3, the
parameter is found at:
Systems > System X > Registration data.
5.17 Emergency Call Number
This is a phone number for emergency calls. It is always possible to call this number,
regardless of whether phone-lock or key-lock are active or not. The Parameter is found in
a template/Number in PDM/IMS3 in the "Settings" folder.
5.18 Audio adjustment
It is possible to configure microphone gain and side tone to achieve optimal audio quality
for each working environment.
The following parameters can be found at:
Audio > Normal
Normal side tone adjustment - Determines how much of the speakers voice that is fed
back to the speaker.
Normal mic adjustment - Determines the microphone sensitivity, that is, how much
sound the microphone shall gain.

Other manuals for ASCOM d41

Related product manuals