ASCOM d41 Configuration Manual

TD 92641EN
21 June 2012 / Ver. G
Configuration Manual
Ascom d41 DECT Handset
23
5.12.1 Action when Handset is Placed In Charger
Redirect Calls and Messages while Charging
Calls can be redirected to another extension when the handset is placed in a charger. In
addition, message absence is also enabled when calls are redirected. When an application/
system sends a message to a handset, it will receive an indication that the handset is
absent. The application/system determines if the message shall be sent to the handset or
not, or redirected to another handset.
The function is automatically cancelled when the handset is removed from the charger.
1 Select Connections > In charger.
2In the In charger action drop-down list, select “Redirect”.
Note: The settings in the system determines how the incoming calls/messages will be
handled. This is a system dependent feature.
Switch off While Charging
When the handset is placed in the charger it can be switched off. When removed from the
charger it will switch on again.
1 Select Connections > In charger.
2In the In charger action drop-down list, select "Switch off".
Mute Handset While Charging
When the handset is placed in the charger it can be muted while it is charging. When it is
removed from the charger it will switch on the sound again.
1 Select Connections > In charger.
2In the In charger action drop-down list, select "Sound off".
Deactivate the Charging Mode
1 Select Connections > In charger.
2In the In charger action drop-down list, select "No action".
5.13 Clear Lists when inserted in Charger
The handset can be configured to clear lists when placed in a charger. The following call
lists will then be cleared:
• Call list
• Missed calls
Using the PDM and the "Edit template" feature, the parameter can be found at
Connections > In_Charger > Clear_Lists_In_Charger
in a template or parameter definition file (.def).
The default setting for "Clear list in charger" is "Off". The feature is activated by changing
the parameter value to "On". When the feature is enabled, the lists are cleared when the
handset is placed in the charger.

ASCOM d41 Specifications

General

Type	DECT telephone
Answering machine	No
Mounting type	-
Product color	Gray
Speakerphone	Yes
Phonebook capacity	500 entries
Languages support	CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, NOR, POL, POR, RUS, SLK, SWE, TUR
Standby time	180 h
Battery recharge time	4 h
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Number of handsets included	1

Weight and Dimensions

Depth	24 mm
Width	53 mm
Height	133 mm