TD 92641EN
21 June 2012 / Ver. G
Configuration Manual
Ascom d41 DECT Handset
15
In order to change the operating frequency band, the following preconditions must be
fulfilled:
• The frequency set to "Not initiated". This can be checked by entering the Admin
menu, see 6 Administration on page 27, follow the path:
Admin menu > Device info > Hardware.
Scroll down to “Frequency band”.
• The handset must not have a DECT registration. If it already has, perform a Factory
reset, see 4.5 Perform a Factory reset on page 11.
1 Enter the Admin Menu, see 6 Administration on page 27.
2 Select "Frequency band" and select the desired band.
• LA (Latin America): 1910-1930 MHz
• Brazil: 1910-1920 MHz
3 Restart the handset.
4 Register the handset.
5 The frequency band option will no longer be available.
Note: The selection is persistent and will stand a factory reset.
To Next Page
Loading...
