ASEA AC24 - Event Log

AC24/30/36 Operations Manual....
47
EVENT LOG CONTROL SCREEN
F1: EVENT LOG VIEWER XXXX Events
F2: EVENT LOG TRACKER
F3: EVENT LOG REGISTRY
EVENT LOG VIEWER
XXX:XX:XX:XX:XX ****START_LOG****
XXX:XX:XX:XX:XX
XXX:XX:XX:XX:XX
XXX:XX:XX:XX:XX
XXX:XX:XX:XX:XX
XXX:XX:XX:XX:XX
XXX:XX:XX:XX:XX
7.9 EVENT LOG
Press the EVENT LOG (or CALIBRATE on older converters) button to access the EVENT LOG
display.
This is for monitoring internal converter logic operation. Press the SYSTEM STATUS button in
any screen to exit.
Press the F1 button to access the EVENT LOG VIEWER display.
This is for reviewing all past events (1000 max.) since the log was last cleared. Press the F1 button
to scroll down (newer events). Press the F2 button to scroll up (older events).
Press the F2 button to access the EVENT LOG TRACKER display.
This is for reviewing events as they occur.