1. Slide the suspension bracket over the pan edge.
2. Insert the probe into the suspension bracket from above.
NOTE!
• Leave a minimum distance of 1 cm between the pan base and the measuring point of the
probe!
• In case the connectivity between cookware and the hob is unstable, this could be due to a
low battery. In those cases, we recommend changing the battery.
Celsius°Cooking™ Cookware
1. Insert an AAA battery in the panhandle
(negative (-) end goes in first).
2. Insert the handle end into the panhandle
and turn it a quarter to secure.
NOTE!
Do not exchange the handle cap of a chef's
pot (31620) with that of a frying pan (31619)
or vice versa.
32
Operation
To Next Page
Loading...
