What does E67 mean on my Asko Hob display?
If 'E67' is blinking together with the Celsius°Cooking™key on your Asko Hob, it means the Celsius°Cooking™ cookware is missing. Ensure the handle cap is mounted correctly; if it is, replace the battery.
What to do if my Asko HIHD854MF shows Er03 on the display?
If 'Er03' appears on the display of your Asko Hob, it indicates that the control panel is dirty or has water on it. To resolve this, clean the control panel.
What to do if Celsius°Cooking™cooking method key is blinking on Asko Hob?
If the set Celsius°Cooking™cooking method key is blinking together with the set temperature display while using the probe on your Asko Hob, it means the Celsius°Cooking™Probe is removed or not in touch with the content, or the temperature has fallen rapidly. Place the probe back or reposition it. Press the cooking method key if the probe isn't auto-detected.
What does E65 mean on my Asko HIHD854MF Hob?
If the E65 Celsius°Cooking™key is blinking together with E65 on your Asko Hob, it indicates that non-Celsius°Cooking™ cookware is not supported. Use Celsius°Cooking™ cookware.
Why is the Celsius°Cooking™key blinking on my Asko HIHD854MF?
If the Celsius°Cooking™key is blinking along with the set cooking method key and display on your Asko Hob, it means the Celsius°Cooking™cookware is assigned to the wrong cooking zone. Remove the cookware and assign it again.
How to fix unstable connection between cookware and Asko HIHD854MF Hob?
If you experience an unstable connection between your cookware and the Asko Hob, it could be due to a low battery in the cookware or an unstable Bluetooth connection. Try switching off the cooktop for 10 seconds and/or change the battery.
What should I do if my Asko HIHD854MF shows U400?
If 'U400' appears on the display of your Asko Hob with a continuous sound, it indicates that the voltage of the mains is too high. Connect the appliance in accordance to rating plate and instructions.
Why does my Asko HIHD854MF cooking zone suddenly stop working?
If a cooking zone on your Asko Hob suddenly stops working and you hear a signal, it's likely that the preset time has ended. Turn off the signal by pressing the - or + key on the timer.
What to do if my Asko HIHD854MF Hob zone stops unintended?
If a zone on your Asko Hob stops unexpectedly and the residual heat indicator is displayed, it means the zone is overheated. Allow the hob to cool down before continuing to cook.
Why is my Asko HIHD854MF cooking zone flashing?
The display on your Asko Hob cooking zone may flash because the pan you are using is not suitable for induction cooking or has a diameter of less than 12 cm. Use a suitable pan.
To Next Page
General
